Sub Categories

Articles

IS 11016 (1984): General safety requirements for machine tools and their operation part 3.1 additional requirement

Published On: 28-10-2020

  Additional Requirements part 1 Instructions for Servicing of Machine Tool at least two copies of detailed and legible descriptions of the machine tool, its …

IS 11016 (1984): General safety requirements for machine tools and their operation part 3.2 additional requirement

Published On: 28-10-2020

  Additional Requirements part 2 Working place operator is not disturbed by the neighbouring workplaces and that there is no obstruction to his movement during …

IS 11016 (1984): General safety requirements for machine tools and their operation part 4 duties and outfit of operator

Published On: 28-10-2020

  Duties of the Operator Duties of the Operator Before Starting the Work on the Machine Tools Check the oil level to make sure about …

IS 11016 (1984): General safety requirements for machine tools and their operation part 2.5 design requirements

Published On: 28-10-2020

  Design requirements part 5 Design of Electrical Equipment Regarding the safety requirements of electrical equipment for machine tools, standards have been formulated both at …

IS 11016 (1984): General safety requirements for machine tools and their operation part 2.4 design requirements

Published On: 28-10-2020

  Design requirements part 4 Designing for Protection Against Chips and Cutting Fluid design should provide for adjustable protective guards capable of arresting chips from …

IS 11016 (1984): General safety requirements for machine tools and their operation part 2.3 design requirements

Published On: 28-10-2020

  Design requirements part 3 Transportation, Mounting and Installation Easy assembling and dismantling Individual components should facilitate safe handling during assembly, transportation, maintenance. instruction manual …

IS 11016 (1984): General safety requirements for machine tools and their operation part 2.2 design requirements

Published On: 28-10-2020

  Design requirements part 2 painting Color scheme optically suited and should avoid strain to operator Painted surface to be smooth Control panel to be …

IS 11016 (1984): General safety requirements for machine tools and their operation part 2.1 design requirements

Published On: 28-10-2020

  Design requirements part 1 General requirements Designed to operate safely as per the operating manual While designing¬† physiological, psychological, safety, hygienic factor to be …

IS 11016 (1984): General safety requirements for machine tools and their operation part 1 terminology

Published On: 28-10-2020

  Terminology 1.Normal Working Area – Area occupied by the machine tool and all its accessories for operation, maintenance and material handling. 2. Hazardous Working …